Informace o publikaci
Influence of Bonded Air- Versus Tin-side on the Shear Strength of Glass-to-Glass Joints of Transparent Epoxy Adhesive at Elevated Temperatures
| Autoři | |
|---|---|
| Rok publikování | 2024 |
| Druh | Článek ve sborníku |
| Konference | Challenging Glass 9 : Conference on Architectural and Structural Applications of Glass |
| Fakulta / Pracoviště MU | |
| Citace | |
| www | https://proceedings.challengingglass.com/index.php/cgc/article/view/497 |
| Doi | http://dx.doi.org/10.47982/cgc.9.497 |
| Klíčová slova | Float glass; Low-iron glass; Transparent adhesive; Air-side; Tin-side; Wettability; Shear strength; Elevated temperature |
| Popis | Given the need to create a sustainable future with limited resources and growing environmental concerns, high-strength adhesives offer an alternative and potentially more efficient load-bearing connection to conventional bolted connections in glass structures. However, there is a lack of knowledge on the elevated-temperature effects on the mechanical strength of these connections. Therefore, in this paper, an experimental program was conducted to evaluate and compare the performance of transparent bonded glass joints. A transparent epoxy adhesive Loctite EA 9455 and two glass types (float and low-iron glass) were chosen to conduct experiments. The differences in surface wettability, between air and tin-sides were examined for both glass types. Results showed that water contact angle measurements on float glass sides were 39.25 % and 3.98 % higher than measurements for low-iron glass on air- and tin-sides respectively. Furthermore, tensile and shear tests were performed on bulk-cured adhesive samples and bonded glass-to-glass block shear specimens respectively, at room temperature (RT), 40 °C, and 80 °C. The results showed that tensile and shear strengths decreased with increasing temperatures. Furthermore, the shear strength was influenced by the surface properties of the glass sides. Indeed, results on air-side likewise tin-side of low-iron glass demonstrated higher resistance for all tested temperatures in comparison with the float glass. |
| Související projekty: |