Informace o publikaci
Calibration graphs for steels by IR laser ablation inductively coupled plasma atomic emission spectrometry
| Autoři | |
|---|---|
| Rok publikování | 2001 |
| Druh | Článek v odborném periodiku |
| Časopis / Zdroj | Fresenius Journal of Analytical Chemistry |
| Fakulta / Pracoviště MU | |
| Citace | |
| Obor | Analytická chemie, separace |
| Klíčová slova | Laser ablation; Infrared laser; Inductively coupled plasma; Atomic emission spectrometry; Steel; LINA |
| Popis | Infrared laser ablation (IR-LA) was studied as a sample introduction technique for the analysis of steels by inductively coupled plasma atomic emission spectrometry (ICP-AES).A comparison of two IR-LA-ICP-AES systems based on Q-switched nanosecond Nd:YAG lasers was performed. The beam of the Lina-SPARK Atomizer (LSA Sarl, Cully, Switzerland) based on the Surelite I-20 laser (Continuum, USA) was moved along a circle. A Perkin-Elmer Optima 3000 DV ICP system was used for emission measurement both with lateral and axial viewing modes. A laboratory-made ablation system based on the Brilliant laser (Quantel) was coupled to a Jobin-Yvon 170 Ultrace ICP (lateral viewing, polychromator part employed). A sample was rotated along a circle during ablation. Linearity of calibration plots was verified at least up to 19 % Cr and 12 % Ni without internal standardization for both LA-ICP-AES systems. Other elements were examined up to 3 % Mo, 1.5 % Mn, 1.7 % Si and 0.15 % Cu. The reproducibility was in the range 5 - 1 %RSD for a mass percentage 0.5 - 20 % of steel constituents. The relative uncertainty on centroid of a calibration line was in the range from ą 4% to ą 12% for Cr, Ni, Mn, Mo, Si, and from ą 8 % to ą 19 % for Cu. The lowest determinable quantities were calculated based on calibrated ranges. Performances of both the IR-LA-ICP-AES were comparable. |
| Související projekty: |